Model-SP-1016

     Model-SP-1016

Spectrographic Sample Polishing Machine
Application :

This Machine is required to get flat and Parallel finish on the sample for high precision Spectro-Analysis

Model : SP-1014 :- RPM: 1440, Basic Model, Without Suction & Disc Break System.
Model : SP-1015 :- RPM: 1440, With Air Suction & Dust Collection System and with Disc Brakes.
Model : SP-1016 :- RPM: 2880, With Air Suction & Dust Collection System and with Disc Brakes.
Model : SP-1017 :- Double Disc, Separate Motor for each disc, RPM: 1440, With Air Suction & Dust collection system and with separate disc brakes.

General :
Main Motor:2HP/415V/50HZ/3ɸ, AC Supply, T.E.F.C. Type ABB / Crompton make
Air Suction Motor:1HP/415V/50HZ/3ɸ/AC Supply, T.E.F.C. Type ABB / Crompton make
Starters:Push Button Type, with overload preventer – Standard Make
Disc Plates :Made of Steel with air gripping arrangement of polishing paper and Locking system to keep the polishing paper in position
Polishing:350 mm Dia, 40 mm Bore Diameter and suitable grit
Disc Cover:Fully Covered with a space open for polishing the sample. The gap between polishing Disc and sample support is kept 2mm; this arrangement makes the air suction more efficient and check the sample from entering the suction system thereby prevents the suction system from damage. The door / Lid is hinge type for changing the polishing paper
Support:The support for polishing is provided in the disc cover against which the sample is held while polishing

Double Disc Sample Polishing Machine
  • Robust Design: No Vibration, Noiseless Operation, Specially suitable for Labs
  • Safety Cover made of 6mm thick sheet, to ensure safety of operator
  • Base is made solid, which absorbs all vibrations and there is no need of foundation

Send Inquiry